Best Cordless Drill Reviews of 2019 {Updated}

As a general contractor I have always been amazed by the power of the cordless drill, from driving screws to drilling holes; the best cordless drill will make tasks easier and allow you to complete tasks faster.

Quick Cordless Drill Comparison

Dewalt DCD771C2 WORX WX176L Black & Decker LD120VA Makita XFD131 Bosch DDB181-02
Dewalt DCD771C2 Cordless Drill WORX WX176L Cordless Drill Black Decker LD120VA Cordless Drill Makita XFD131 Cordless Drill Bosch DDB181-02 Cordless Drill
3.64 pounds 2.9 pounds 4.05 pounds 7.25 pounds 6.55 pounds
20 volts 20 volts 20-volts 18 volts 18 volts
450/1500 rpm 400 rpm 750 rpm 500/900 rpm 400/1300 rpm
3 Year Warranty 3 Year Warranty 2 Year Warranty 3 Year Warranty 1 Year Warranty

As the drill tech has moved forward, I have been able to tackle tasks quicker and quicker, and have become a power tools junkie of sorts and as such am always looking for the next latest and greatest cordless drill.

Cheap drills don’t last long and the purchase should be seen as an investment. For the purposes of this review, I have focused on the best cordless drills on the market in 2019. In the list below you will find the best cordless drill :

Best Cordless Drills in 2019

1. Dewalt DCD771C2 20V MAX Cordless Drill Driver

First up, we have the Dewalt drill. The Dewalt DCD771C2 is a 20 volt drill designed to solve any heavy duty task. If you are still using analog methods to drill holes, it’s time to upgrade and look for this cordless drill from Dewalt. The tool is designed to fulfill all your need by possessing a compact design to fit everywhere.

Moreover, the fitted transmission system perfectly fits this tool for outstanding performance. It enjoys 2-speed transmission (0-450 & 1,500 rpm) which enables to drill and fasten under different speeds.

Besides having excellent transmission system, Dewalt DCD771C2 Cordless drill/driver has a powerful motor. It delivers 300 units watts out to enable completion of a variety of tasks. The sleek outer design is complemented by a rubberized ergonomic handle which a wide range of use. Whether you are drilling on ceiling, wall or any other part, no fatigue due to comfortable handle and lightweight design; 3.6 pounds.

Pros

  • Plenty of power
  • Efficient LED light
  • Comes with a pack of 2 batteries
  • 3 Speed Drill which matches Task to Speed
  • LED Light Included
  • Battery Life Lasts 24+ Hours

Cons

  • Has no bit holder
  • The LED light is in an odd position which makes it hard to see

Read more about the Dewalt DCD771C2 MAX Cordless Drill Driver

2. Milwaukee M18 Cordless Drill

The Milwaukee drill is a light weight lithium ion battery powered drill that is both easy to use and easy to handle.

If you’re a professional builder or contractor, and you want to use a tool for hard work and also for long time, you need more than just power and a comfortable grip, you will need a drill that’s durable, versatile and long lasting. The can get all these specs in Milwaukee M18 FUEL.

This drill has high power rating as compared to the Kobalt model. it spins at a maximum speed of 1,850 RPM and produces up to 650 inch-pounds of torque.

However, it has an upper hand over Kobalt. It scored an A+ in our battery life test, and that’s because of unique REDLITHIUM battery, and you get a spare battery also ikinstead of one. Even though it takes an hour to fully recharge a dead battery, you can expect it to last a very long time. This drill scored a B in our user experience survey. Several users noted that it feels heavier than the rest. One even commented that it “would wear me out fast.” With the weight of 5 pounds, this one is the heaviest drill from those which we tested.

The power this cordless drill delivers and the long life, compensates for the extra weight. High power plus a long battery life makes the Milwaukee M18 FUEL an excellent choice for people who use a cordless drill on a daily basis.

PROS

  • Longest-lasting battery
  • Highest power rating – 650 inch-pounds of torque
  • Most versatile drill we evaluated
  • The most powerful 18v cordless drill
  • Lightweight and Sleek Design
  • Ergonomic and Comfortable Grip

CONS

  • Heaviest drill we reviewed
  • Charging time is over an hour in our test
  • Not a good fit for home users
  • More pricey than other 18v drills

Read more about the Milwaukee M18 Cordless Drill

3. BLACK+DECKER LDX120C 20V Cordless Drill

This LDX120C drill provides excellent value. It can drill through plastic, wood, and metal. It’s compact size makes drilling in confined spaces easy.

It features an 11 position clutch and a variable speed setting.

Black & Decker is another indisputable company which produces electrical tools. Boasting high-quality products, their quality is always assured. Among many products they manufacture is, BLACK+DECKER LDX120C 20-Volt MAX Cordless Drill/Driver. Enjoying Lithium technology in battery construction, performance is unmatchable with NiCad battery powered drills. To decrease overall weight, outer casing features plastic material with rubberized handle. A 20 volts battery power this drill hence extended operation period.

Now, if you deal with hard materials, there is no need to panic when looking for a heavy-duty drill. With this cordless drill from Makita, it will correctly drill or fasten within seconds. It’s equipped with 11 position clutch which helps to control speed when drilling wood, metal plastic among other materials. The compact and lightweight construction give it the ability to work in tight places with ease.

Pros

  • Small and lightweight
  • High range drilling speed
  • Awesome Price
  • Robust and durable battery
  • Perfect for small tasks
  • Light and sleek
  • Usage versatility

Cons

  • Chuck loosens itself during use
  • Not suited for heavier hammer drill use
  • No high speed charger and no second battery included
  • Not ideal for heavy-duty tasks

4. WORX WX176L Cordless Drill

This ergonomically designed WORX WX176L makes it quick and easy to rotate the dual-chuck platform allowing endless combinations of drill and driver bits.

The WORX Switchdriver cordless drills and driver provides you the smooth and calm power tool which can bring love and eager to your work. This WORX Switchdriver provides you 2 functionalities in one tool. When you’re replacing bits, this tool has a feature of rotating head which minimize the time taken. This feature is best as it will enhance tour skills and make it very easy and quick to drill holes as well as driving in screws

So, you can switch between drilling and screwing very easily and the swift would be very simple with this WORX Switchdriver. For some additional performances, this cordless drill boasts the speed 2x with which you can handle all driving and drilling needs.

The WORX Switchdriver cordless drill is a very friendly tool which take cares of your bits as well as the drilling area. To do this, the device gives an electronic torque control.

This WORX Switchdriver benefits in evading screw doffing and avoiding the damage to other functioning tools. The 12-speed setting is excellent in providing sufficient power which allows accurate drilling or driving.

Due to this, this drill needs less power to work. 20Volts battery influences this practice while LED light illumines in dark conditions.

Pros

  • Spinning dual chuck platform
  • Extremely easy to control
  • Substitute batteries with other gears
  • Ergonomic and protected design
  • Comes with an additional battery
  • Comfortable design
  • Very compact and lightweight

Cons

  • Hard to take out the battery
  • Chuck loosens itself during use
  • Not suited for heavier hammer drill use
  • No high speed charger and no second battery included

5. Bosch 18-Volt Compact Tough Drill Driver

This compact cordless drill driver weighing only 3 lbs and features a compact design which works well in tight spaces. It comes with a 2 speed transmission for heavy duty work and one gear for speed.

The Bosch DDB181-02 18-Volt Cordless Drill carries the delight of cool drilling while excluding performance conceding weight. The efficiently designed bit provides proficient boring and driving.

It has a 18 Volts Li-Ions battery which is perfect for supporting the tool to have sufficient time before it drains, not like some drills which give insufficient minutes. With its solid and lightweight design, it means that its application is very useful and best even for overhead use.

Prepared with Bosch DDB181-102 ½ Inch Driver, its functioning is unmatchable. Also, the motor is joined with 2-speed settings which render this drill excellently for light and heavy-duty applications. It boasts a torque delivery of 350 inches per pound and 1300rpm for fast fastening and drilling respectively.

The successor to this drill, the Bosch DDS183B, was named the best cordless drill by Cordless Drill Hub. That drill is recommended if you require more torque, as it boasts a torque rating of 500 in-lbs.

Ergonomic grip brings comfort and control ability even when maneuvering places assisted by 7.1 inches had length and LED light. 3-years warranty covers the toll, while battery enjoys 2 years warranty.

Pros

  • The sleek and efficient charging station
  • Long lasting battery
  • Precise and safe drilling
  • Balanced construction weight
  • This drills style and color makes it look amazing
  • Comes with a (non obstructed) LED work light
  • Very small and compact

Cons

  • Has a soft casing
  • The battery seems to die very fast

6. Kobalt 1424A-03

If you’re on a budget, the Kobalt 1424A-03 is the drill for you. This drill got an A- in our user experience survey.

This drill is surprisingly strong and power as compared to prize paid for this drill. It spins at a maximum speed of 2,000 RPM and can produce up to 650 inch-pounds of torque, and they are the highest speed and torque specs of any drill that we reviewed. But still this one is not a perfect drill by any means. C score was scored by this drill in our battery life survey. This problem is very severe because the drill comes with only one battery, which takes a full hour to recharge. For example you ran out of charging during your work, then you have to wait for an hour for so that battery is charged instead it would be better if it has an extra battery so that we can swap the batteries and carry on your work.

It is also relatively heavy as compared to the competitive drills. It weighs 4 pounds – the average weight of the drills we reviewed is 3.5 pounds. This may not seem like a big difference, but when you’re working on an intensive task for hours, that extra half pound makes a difference. Despite all the issues, this drill fits best for the home tool set by paying just $99, which is very low as compared to what we get.

Pros

  • Produces a lot of torque
  • Spins at high speeds
  • Costs less than $100

Cons

  • Only comes with one battery
  • Runs out of power quickly
  • Battery takes a full hour to recharge

7. Makita XFD10R

Several of them even called it out as their preferred drill – participants mentioned that it was powerful, light well balanced, comfortable to hold, even good for small hands. Our team is diverse, and represents different genders, physical figures and levels of experience with power tools, and their widespread approval means that you are surely going to enjoy this drill irrespective of your situation.

This drill scored very well just because of its excellent design. It has a soft rubber grip that’s why it is comfortable to hold, which is a huge boon when you need to use it for hours on end. This drill contains 21 different clutch settings, so you can fine-tune it for specific projects. It contains two LED lights used to lighten up the working area. This drill can rotate at a maximum speed of 1,900 RPM and produces up to 480 inch-pounds of torque. Although it is not the best one – others can produce up to 650 inch-pounds of torque and spin at 2,000 RPM – but still it is enough to do our drilling tasks.
Pros

  • Great speed
  • Dead battery recharges in just 30 minutes
  • Very light, only 3.3 pounds

Cons

  • Only average torque – 480 inch-pounds of torque
  • No on-tool bit storage
  • Short warranty period – only one year

8. Makita XPH102 18V LXT Cordless Hammer Driver/Drill

Makita is a world-renowned global brand for the production of various high performing consumer products. To prove this, Makita XPH102 18V LXT Cordless Hammer Driver/ Drill is among best performing on the market.

Designed featuring exceptional star technology, the tool is safe from overcharging, overheating among other malfunction which can shorten tool lifespan. This means that whenever working with Makita XPH102, safety is assured. Fitted with Makita-4-pole motor, it supplies 400 inches per pound ideal for perfect fastening.

The variable 2-speed (0-600 & 0-1,900 RPM) designing, is ideal for providing enough power for a variety of activities like drilling, driving, and hammering. Enhanced protection against dust and water renders this tool durable than most if its competitor. No more fatigue as the drill weighs just 3.9 pounds.

Besides, the overall construction aims at increasing ergonomics for a comfortable working. Makita XPH102 is just 7.75 inches for added comfort and maneuvering around tough places.

Pros

  • Outstanding protection
  • Rubber enhanced soft grip
  • Battery charges quickly
  • Lightweight design

Cons

  • Doesn’t have magnetic to hold screws

9. Pink Power PP182 18V Women Cordless Drills

Manual drills will drain all your energy while delivering low performance so forget about these, now you have cordless drill from Pink Power which will give you effortless experience.

Pink Power PP182 Cordless drill for women makes your home maintenance and repairs smooth and quick, this one provides efficient drilling due to fitted bubble level unlike other drills on the market. Moreover, pressing the trigger; LED lights automatically turned on which improve visibility.

Power PP182 cordless drill comes with a magnetic base which provides hands-free screw and bit placement and thus, provides secure operations so no more manual bit changing. When equipped with a battery, this drill weighs just 3.5 pounds when equipped with a battery thus straining in your fingers or wrist due to weight stress.

A keyless block is easy to replace while 500rpm and 16 setting torque which brings power to your fingertips. 18Volts NiCad battery provides power to the drill.

Pros

  • Inbuilt bubble level for precise drilling
  • Lightweight construction
  • Magnetic enhanced base
  • Automatically lighting LED

Cons

  • Less power output than rivals

10. PORTER-CABLE PCCK604L2 20V Cordless Drills/Driver

PORTER-CABLE PCCK604L2 20V Cordless Drill is here for you for drilling and impact driving. This is ideal for application in many uses as its design allows excellent performance. Its motor delivers 1500 rotations per minute making your drilling simpler.

Moreover, the 2-speed setting is ideal especially when you get to the difficult drilling task. It also has LED light which illuminates dark areas so it works efficiently. It has a non-slipping handle which provides a perfect grip.

PORTER-CABLE PCCK604L2 20V is also ideal for driving works apart from drilling,. It delivers 1450 inches per pound torque at 2800 rpm and 3100 bpm and thus provides excellent impact mechanism unlike other drills. This one come featuring 20 Volts Li-Ions battery which powers drill for an optimum working duration.

The battery installed in this indicates remaining charge. With a lightweight and compact construction, storage is efficient.

PROS

  • Beautiful, inspiring design
  • Comfortable and balanced construction
  • Interchangeable batteries
  • Extended reliability
  • Cons
  • Fast fading batteries

11. Hitachi DS18DGL Cordless Drill – 18-Volt

Hitachi DS18DGL is a cordless drill machine which you can count on its quality. It is designed by a prestigious company, this machine will perform to excel.

This tool gives produces high torque which is increased by a powerful 22+1 clutch which provides 22 drive settings. It works with greater accuracy and trails and errors. In addition with the 2 gear setting it is a superior way of ensuring your type of work. The best application in limited space that allows to drill 400 inches per pounds.

Working with a cordless drill while having a reliable power source depends on the type of batteries. You will never experience power draining with Hitachi DS18DGL due to Li-Ion 18 volts battery.

There is variable speed setting trigger known as responsive trigger which efficiently control the drill during operations.

The responsive trigger has variable speed settings which effectively allow you to control the drill during operations. Its heightening is easy to replace since it’s keyless, while double-sided driver bit make it efficient. Its ergonomic design reduces fatigue when working for an extended time.
Pros

  • Non-fading Li-Ion batteries
  • Double-sided driver bit
  • Balanced and ergonomic slim handle
  • Extended Warranty

Cons

  • Lacks speed when drilling metals

12. Bosch CLPK232A-181 Cordless Drills Driver / Impact Combo Kit

A great cordless drill makes drilling work a breeze. Bosch CLPK232A-181 Cordless is versatile tool and thus ideal consideration.

The drilling and driving ability combines to give a professional performance which you would not regret buying. The device comes with DDS181 clutch settings which transfer torque efficiently. There is no more persecution when drilling or driving screw with 2 speed setting.

This drill brings variety with 7-inches head during work which allows it to get into inaccessible

Areas. It also has speed adjusting trigger which is used for overhead drilling. This device is ideal when driving in nuts due to its 1500 inches per torque at 2800 3000 rpm.

It can drive in a 3 by ¼ inches in seconds of time with this capability. The drill has 18 volts 2.0Ah batteries which are fast charging to provide smooth working. Easy carrying and proper organizations is offered by a carrying bag.
Pros

  • Comes with a carrying bag
  • Perfect for multiple uses
  • Durable batteries
  • Easy to control speed trigger

Cons

  • Poor LED positioning. LED Positioned on Base of Drill

13. Cartman 20V Cordless Drill/Driver

Cartman 20V cordless drill and driver is a powerful tool which is designed to deliver remarkable torque for effective drilling. It featured a heavy-duty motor which gives a varying speed from 1-1500 rotations per minute which produce a torque of 221 inches per pound. This drill is user friendly as drill boasts a lightweight construction and thus reduces draining.

A high performing 20 volts Li-Ion battery energizes this Cartman cordless drill. This battery is ideal for working in longer term.

The drill contains 21 positions with which you can accurately control speed which allows you to drill into different material such as metal, wood, plastic and others. There is LED light at front which illuminates working surface when working in insufficient light.

Pros

  • Easy to control 21-speed
  • Ergonomic handle
  • Bright LED to light up drilling area
  • Two batteries for continuous working
  • Easy to use
  • Affordable, Concise and compact
  • Holds charge for a long period of time
  • Lightweight

Cons

  • Drill bits size not labeled

How to Pick the Right Cordless Drill

With the power of cordless drills, tasks can be done quicker which saves time and money. A good battery life is important. When I look to purchase a drill, I look for a one that is complete. Moreover, it is important to keep this in mind when buying a drill. Is the purchase just for simple DIY projects, or is this going to be a tool that you have to use every day at work. You can also think about whether you want a brushless motor or a brushed motor. One should also think about the conditions in which one will have to work and whether the drill will be able to stand the conditions. Hammer driver work well on concrete and other hard to drill materials. On the other hand, compact drills, will work well in confined spaces.

Click Here to Leave a Comment Below 0 comments

Leave a Reply: